Product Summary

The BT8370KPF is a Fully Integrated T1/E1 Framer and Line Interface. BT8370KPF is packaged in an 80-pin Metric Quad Flat Pack(MQFP). A pinout diagram of this device is illustrated in Figure 1-1. Figure 1-2 details a BT8370KPF logic diagram. Pin labels, names, I/O functions, and descriptions are provided in Table 1-1. The input pins listed below contain an internal pullup resistor (>50 kΩ) and can remain unconnected if the active-high input state is desired. All other unused input pins should be either pulled up or grounded.

Parametrics

BT8370KPF absolute maximum ratings: (1)VDD Power Supply (measured to GND): –0.5 to 7 V; (2)ΔVDD Voltage Differential (between any 2 VDD pins): 0.5 V; (3)Vi Constant Voltage on any Signal Pin: –1.0 to VDD + 0.5 V; (4)ESD Transient Voltage on any Signal Pin, HBM rating: ±2kV; CDM rating: ±700V; MMM rating: ±200V; (5)Ii Constant Current on any Signal Pin: –10 to +10 mA; (6)LATCHUP Transient Current on any Signal Pin, Digital Pins: –350 to 400mA; Analog Pins (TIP,RING): –350 to +400mA; (7)Ts Storage Temperature: –65 to 150 ℃; (8)Tj Junction Temperature: (θjA x VDD x IDD) + Tamb: –40 to 125 ℃; (9)Tvsol Vapor Phase Soldering Temperature (1 minute): 220 ℃; (10)θjA Thermal Resistance (80MQFP), Still Air: 43 ℃/W.

Features

BT8370KPF features: (1)Single-chip T1/E1 framer with short/long-haul physical line interface; (2)Frames to popular T1/E1 standards: T1: SF, ESF, SLC96, T1DM; E1: PCM-30, G.704, G.706, G.732 ISDN primary rate; (3)On-chip physical line interface compatible with: DSX-1/E1 short-haul signals; DS-1 (T1.403) and ETSI long-haul signals; (4)Two-frame transmit and receive PCM slip buffers; (5)Clock rate adapter synthesizes jitter attenuated system clocks from an internal or external reference; (6)Parallel 8-bit microprocessor port supports Intel or Motorola buses; (7)Automated Facility Data Link (FDL) management; (8)BERT generation and counting; (9)Two full-duplex HDLC controllers for data link and LAPD/SS7 signaling; (10)B8ZS/HDB3/Bit 7 zero suppression; (11)80-pin MQFP surface-mount package; (12)Operates from a single +5 Vdc ±5% power supply; (13)Low-power CMOS technology.

Diagrams

BT8370KPF Functional Block Diagram

Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
BT8370KPF
BT8370KPF

Other


Data Sheet

Negotiable 
Image Part No Mfg Description Data Sheet Download Pricing
(USD)
Quantity
Bt835
Bt835

Other


Data Sheet

Negotiable 
BT8370KPF
BT8370KPF

Other


Data Sheet

Negotiable